The NBlade Station uptake the Voip Provider SIP and IAX
To ADD a new provider do as indicated below:
Go to Voip -> click on Provider
To add another provider, click on
“ADD
”. 
Options
The following parameters are automatically set by provider as Eutelia, Shypho ecc.
- Provider Name:
I
nsert the provider name
to which one is connected, SIP/IAX
NOTE:
this is just a label and doesn’t effect the configuration of the provider in any way.
- Protocol:
It identifies the comunication protocol between the Station and the provider.
- Host:
It’ the server, SIP/IAX of the provider ex: sip.myprovider.com
- Fromdomain:
This parameter is required by the providers (Usually is the same as the host)
- Username:
Is the user to the Voip service
- Password:
It’s the login password to the Voip service
- Auth:
It’s the
type of authentication used by the user of the Voip service
,
There are two kinds, plaintext or md5 (plaintext is normally used).
- Codec:
Select the kind of codec to be used: GSM, ULOW , ALOW, G726, ILBA e G729 .
If you choose ALL it will be assigned by the station.
- Type:
It’s the kind of connection to use between the NBlade Station and the provider
Usually the Friend is used.
- Timeout:
It’s the provider’s maximum laps of timeout of comunication between th NB
lade
Station and the provider,
it is the provider’s timeout. It’s usually expressed in seconds
between 30 and 60.
- Context:
It choose which flow the Incoming call
should follow
- Prefix:
It’s the default prefix for the outgoing calls of this provider.
- Remove num:
The number indicates how many number must be canceled from the dialled number
It’s used when one add the prefix to direct a call to a specific provider.
For example if one dial the number 30212345678 and the you put 1 in "remove num"
the number 3 will be removed. The new number sent to the provider will be
0212345678
- Register:
One need this parameter if wants to register the NBlade Station on the provider
station.
Most of the time it is necessary, in fact without the registration the provider wont be
able to forward the incoming call to the BADE Station.
Click on the appropriate button to confirm the changes
Save the Rescue Point as described in the "Saving Rescue Point
" section and we recommend
that you insert a description of the changes.
(example: ”Provider Added“)
